Specification |
Communication Mode: Full-Duplex & Half-Duplex;
Type: Ethernet Switch;
Transmission Rate: 1000Mbps;
Ports: 24;
Product Description: Cisco Catalyst 9200L Network Advantage Switch;
Poe Budget: 740 W;
Device Type: Switch - 24 Ports - L3 - Stackable;
Enclosure Type: Rack-Mountable;
Subtype: Gigabit Ethernet;
Power Over Ethernet (Poe): Poe+;
Performance: Stacking Bandwidth: 80 Gbps Switching Capacity: 56;
Mac Address Table Size: 16000 Entries;
Jumbo Frame Support: 9198 Bytes;
Routing Protocol: Ospf, Is-Is, Rip-1, Rip-2, Eigrp, Hsrp, Vrrp, Pim-;
Remote Management Protocol: Snmp 1, Rmon 1, Rmon 2, Snmp 3, Snmp 2c, Cli, Netc;
Power: AC 100-240 V (50 - 60 Hz);
|
Communication Mode: Full-Duplex & Half-Duplex;
Type: AC Power, Back-to-Front Airflow;
Transmission Rate: 10/100/1000Mbps;
Ports: ≧48;
Jumbo Frame: 9K;
Operating Temperature: 0 to 50;
Flash Memory: 1GB;
Max. Power Consumption: 80W;
|
Communication Mode: 0;
Type: AC Power, Back-to-Front Airflow;
Transmission Rate: 10/100/1000Mbps;
Ports: ≧48;
Packet Buffer: 1.5MB;
Jumbo Frame: 9, 000;
Input Voltage: 100-240VAC, 50-60Hz, 0.8A;
Stackability: up to 6 Units;
Mounting Methods: 4 (3+1 Redundancy), Back-to-Front;
|
Communication Mode: 0;
Type: AC Power, Back-to-Front Airflow;
Transmission Rate: 10/100/1000Mbps;
Ports: ≧48;
Packet Buffer: 1.5MB;
Jumbo Frame: 9, 000;
Input Voltage: 100-240VAC, 50-60Hz, 0.8A;
Stackability: up to 6 Units;
Mounting Methods: 4 (3+1 Redundancy), Back-to-Front;
|
Communication Mode: Full-Duplex & Half-Duplex;
Type: Ethernet Switch;
Transmission Rate: 1000Mbps;
Ports: 30;
Standard: IEEE 802.3/3u/3ab/3X/3z/3af/3at;
Poe Ports: 24*10/100/1000Mbps RJ45 Poe Ports;
Uplink Ports: 2*10/100/1000Mbps RJ45 Ports;
SFP Ports: 2*Gigabit SFP Ports;
250 Meters Poe: Support;
Vlan Isolation: Support;
Poe Standard: 48V IEEE 802.3af/at;
Storage and Forwarding: Support;
Mac Address Table: 8K;
Bandwidth: 56gbps;
Forwarding Rate: 41.644mpps;
Memory Cache: 3mbit;
Poe Input: 400W;
|