What is Custom Multi-Cavity Plastic Parts for Efficient Injection Molding
Price
Purchase Qty. Reference FOB Price
1,000-9,999 Pieces US$0.40
10,000-49,999 Pieces US$0.38
50,000+ Pieces US$0.36
Sepcifications
- Material PP
- Application Medical, Household, Electronics, Automotive, Car, Furniture, Electronic, Hardware
- Certification ISO
- Transport Package Wooden Cases/Air/Sea
- Specification Custom
- Trademark HOWE or Custom
- Origin China
- Name Plastic Six Point Shape Enclosure
- Gate Type Side Gate, Sub Gate, Pin Point Gate, Edge Gate etc
- Mold Life Time 300K~1, 000K Times
- Mold Materials S45c, P20, 718, 718h, Nak80, etc
- Ejector System Stripper Plate, Lifter, Push Bar, Ejection Pin etc
- Payment We Support T/T, Paypal
Product Description
Mould Builder Customize Injection Molded Housing with ABS/PP/PS/POM Plastic Material Product Description Product name Multi cavity hot runner injection mould supplier Mould Material ...
-
Filling Shortage of Plastic Injection Molding During plastic injection molding, there will be some problems on plastic parts, such as the color, gloss, size, filling shortage, uneven marks. Filling shortage problem is due to material is solid before filling the cavity. I will talk about some of my own opinions as below. -
What Are Bubbles in Injection Molded Products? In injection molding, bubbles are not a common defect in general small workshops. Bubbles mainly occur in non-large transparent products; small transparent products are not prone to bubbles, while non-transparent products typically do not have specific requirements. Today, we will focus on bubbles in injection molding as we continue our exploration of molding defects. -
What Are Sink Marks in Plastic Injection Mold? Sink marks are some kinds of depression on the surface of the plastic part due to the shrinkage of the material underneath. Sink marks most commonly occur on a surface that has ribs, bosses, and other voluminous features on the rear side of the moulding. All plastics shrink as they freeze off, some more than others. One of the things you can do during the design phase is to identify where these injection molding sink marks are going to be and choose a material that doesn’t shrink as much. Or you can even add something to the plastic material like glass fibers or you can put talcum powder in and it will mitigate the shrinkage quite a bit.