Board (floor) The V-Shpae Flot Coating Machine (water-based paint)

Oil (water paint) Equipment Instruction
The entire online painting production line consists of 2 parts:
1 long sides oiler: oil station, bake Road station, transport station
2 short side oiler: collecting plate transport station, oil station and heating Station
the slot length side, V type chamfering oiling, drying after delivery to the short side slotted line bin, from the short side slotted line to complete the slotted, floor into the short side oiler material storage, on the short side V type drying to obtain the finished product.
Detail Instructions:
A long side oiler(this part can also be installed in the slotting device but must ensure that the absorbing effect, the surface of the plate without a lot of dust)
The paint on the floor long side V type slot coating, the machine is composed of a regulating device, oiling device with power, using ceramic piece oiling which is durable. One end of the frame by moving the slider to adjust the width of plate, according to the different activities, push and pull mechanism spacing, and lock. The two ends of iron block can be completely jammed sheet plate, ensure smooth operation in the process of transmission, no deviation which ensure even incision.
1)conveying motor 0.75KW
1500*1200*1060 dimensions (length * width * height)
Oiling station 500*1200*1060 (length * width * height)
2 oven drying in a good coating paint on the notches, adopts the synchronous belt transmission, two-way each by 16 groups heater which is composed of plate after oiling, drying, air temperature is adjustable.
2) drying 3.4KW*16
1 motor 1.5KW
2 dimensions of about 4200*1200*1060 (length * width)
3 conveying speed of 0-130 M / min (adjustable)
3)Transportation machine, conveying the floor, will complete the oiled floors to the short side slotted line
1 conveying motor 0.75KW
2 dimension of 1500 * 1200*1060 (length * width)
4)The short side of the ground material conveying plate, oil, will open a good groove floor to the material storage, paint on the short side floor V slot coating, the completion of the entire oil drying with conveying mechanism, adjusting device, an oiling device, a drying device and other institutions(this part can also be installed in the slotting device but must ensure that the absorbing effect, the surface of the plate without a lot of dust)
1 into the plate silo height 950mm
2 conveying speed of 0-70 M / min (adjustable)
3 dimension of 3600 * 2100*1200 (length * width)
4 conveying motor 1.5KW
5 drying lamp 3.4KW * 8
6 plate working height 800mm
The other explanation
A)The whole of the 1 line of the total power is about 113KW.
B)production speed to oiling the long side is 130 meters / minute
C)oiler uses the water soluble paint
D)equipment warranty period: the mechanical part of electrical parts of one year.