Customized Force Sensing Resistor. Equivalence of Interlink. Fsr Sensor on Sleep Monitoring Bed

Product Description
Force Sensitive Resistor are resistive sensor exhibiting vary resistance that responds to force applied to the sensing area. As force on the sensor is increased, resistance is decreased.
For the single-zone sensors, as the sensor is a Two-terminal device that can essentially be treated as a variable resistor whose value is controlled by applied force, and also a switch whose threshold is controlled by applied force and setting up.
The sensors are made up of robust polyester film, high-conductive material and Nano-sized force sensing material. The top layer of the sensor consists of the area of force sensitive layer on a flexible film. And bottom layer is comprised of conductive circuit traces on a flexible film. And the above two layers are s are stick together by spacer adhesive and active area is without adhesive. When the active area is applied force, force sensitive layer on the top layer shunts the circuit traces on the bottom, varying resistance output terminals.
 

Static / dynamic pressure sensingQuick responseDurable long lifeCustomized designFlexibleSimple application circle design

Technical Data and Physical Properties
 
Force curve
The following plot shows an example response resistance curve, when the sensor actuated by a force curve tester.


The following plot shows an near-linear curve whose axes value treated by log10.



Application Circuit
1.Voltage Divider
The sensor is placed in series with a fixed resistor (R0), and output voltage is measured across R0. It is given by Vout=Vcc*R0/(R0+Rs).
How to define the fixed resistor value, Basically, R0 is 1/3 to 1/2 of the resistance range of Rs. What's more, if R0 is appropriate, you can get a near-linear curve of Force vs Vout in a special force range. Depending on the impedance requirements of the measuring circuit, the voltage divider could be followed by an op-amp.


2.Force Threshold Switch
 

This is an ideal circuit for applications that require on-off switching at a specified force. It consists a Wheatstone bridge circuit and a voltage comparator.
When apply force and Rs becomes to be lower than R1, lead U1+ to be higher than U1-, and Vout becomes to be high. This high level signal can used to be trigger signal of following devices, for example, it can trigger a relay, and then control LEDs, buzzer warning, motor and other load devices.

Custom sensors
We can design specialized sensors to meet the customers' unique requirements. It is including specialized shape and size, specialized force vs. resistance characteristic, special material and thickness, unique active area shape and quantity, and also connection options.

 Mechanical data of D18ST, and other types of FRS sensors.