Ap-Yv3302 Anti Static Sensor for Real Time Monitor Electronics or LED Industry

AP-YV3301 Static Sensor

General                                                                                 
AP-YV3301 static sensor is a measuring device used to detect static voltage on object surface. It adopts the advanced non-touchable crystal oscillation working style and ensures the measurement accuracy.
Industry Applications
Widely used in electronics, opto-electrical, LED industries etc.
Product Feature                                                      
(1)  Comfortable hand feel and elegant appearance
(2)  Measuring distance set by dial switch
(3)  Wide measuring range and high measuring accuracy
(4)  High clarity and comprehensive LCD data display terminal
(5)  Real time monitored data transfer to PC
(6)  Comfortable operation and easy to use
SpecificationNote:Measuring distance of 25mm,50mm,100mm are for measure static voltage less than 5KV;
Measuring distance of 200mm,300mm,400mm,500mm,600mm are for measure static voltage 5KV→20KV;

Displayed Information
Device address
Working status
Output HV
Output Frequency
Duty ratio
Real time voltage
Static threshold voltage
Mechanical Parameters
Sensor
Dimension  43*33*85mm(L*W*H)
Net weight  39.5g±3g
LED display
Dimension  <44*33*85mm(L*W*H)
Net weight  39.5g±3g
Outline dimensional drawing


Operation Instructions
1, instructions for use:
When in use, the electrostatic sensor detection window should be parallel to the surface of the object to be measured. Choose a measuring distance according to the static charged amount and environment (i.e., the foregoing provisions of the standard detection distance: 25mm, 50mm, 100mm, 200mm, 300mm, 400mm, 500mm, 600mm) and measuring range setting.  Here the data shown on LED display is most accurate.

2, operating procedures:
Choose a measuring distance by turning the round dial switch with a cross screwdriver diameter 3mm according to the static charged amount and environment.Choose a measuring range by toggle bar code switch according to the static charged amount and environment.Set the electrostatic protection threshold by the monitoring software.
Set the device address by turning the round dial switch with a cross screwdriver diameter 3mm according to the production position