Basic Info.
Type
Level Non-Contact Laser Device
Output Signal Type
Switching Type
Production Process
Integration
Product Description
General DescriptionThe MSE-AL30 is a level non-contact laser device to measure distances from 0.1 m to more than 5 m with pinpoint accuracy.
A given target can be clearly identified with the help of a red Laser sighting point. In terms of operating reach, the MSE-AL30 performs depending on the reflectance, morphology and qualities of the target to be measured.
The sensor works based on comparative phase measurement. It emits modulated Laser light which is diffusely reflected back from the target with a certain shift in phase to be compared with a reference signal. From the amount of phase shift, a required distance can then be determined with millimeter accuracy
A distance measuring cycle can be triggered in three different ways:- By sending a command from the PC or another equivalent control unit
- By making appropriate prior parameter settings for the auto start command and applying supply voltage
- By external triggering (in remote-trigger mode).
Technical data| Measurement range | 0.1 m up to 5 m |
| Measuring accuracy | ± 1mm ( with good surface, with stabile reflection ) |
| Resolution | 0.1 mm, user scalable, standard 1 mm |
| Reproducibility | ± 0.5mm |
| Measuring Frequency | ≤ 10Hz |
| Ambient temperature | -10 °C up to < +50 °C
-40 °C up to < +50 °C (only with -h option)
-10ºC ~ +70ºC ( Water cooling + air purging ) |
| Storage temperature | -40 °C ~ +60 °C ( Air relative humidity < 70% ) |
| Supply voltage | 10 V ... 30 V DC |
| Power consumption | < 0.4 W in standby,
< 1.5 W for distance tracking,
< 24 W with heating active (only with "-h" option,and supply voltage should be +24VDC) |
| Data interface | RS232 ( or RS422 option), baud rate 9600 (2400..38400), ASCII, Format 8N1 (fix) |
| Digital output | „high-side-switch", programmable switching threshold and hysteresis, rated for max. load of 0.5 A, HIGH = UB - 2 V, LOW < 2 V |
| Analog output | 4 mA ... 20 mA current output,
Adjustable distance range limits,
programmable on error event 3 mA or 21 mA
Load resistance ≤ 500 Ω,
Accuracy ± 0,15 %,
Temperature drift< 50 ppm/K |
| | |
| Digital input | External trigger, trigger pulse 3 up to 24 V, pulse length≥ 1 ms, start of measurement 5 ms + trigger delay, trigger slope and delay can be set (0 ms ... 9999 ms), |
| EMC | EN 61326-1 |
| Shock resistance | 10 g / 6 ms
Persistence shock DIN ISO 9022-3-31-01-1 |
| Laser Class | Class 2, under EN60825-1:2007, ≤1mW |
| Wave length | 650 nm (red visible) |
| Laser divergence | 0.6 mrad |
| Laser angle tolerance | Better than ± 1° to the ground plane |
| MTBF | 30,000 hours, 24/7, operation temp. +25 °C |
| Connector | 12-pol. Male socket |
| Dimensions (LxWxH) | 220 mm x 124 mm x 60 mm |
| Mounting | See" Figure 3" |
| Weight | approx. 1.9 Kg |
| Protection class | IP 65 (spatter water and dust protection) |
Address:
Kexin Building, 212 Changjiang Road,Yantai Development Zone, Shandong, China
Business Type:
Manufacturer/Factory, Other
Business Range:
Industrial Equipment & Components, Instruments & Meters
Company Introduction:
We are an engineering company in Yantai with German management and German investment. We develop, produce and market non-contact optical sensors and measuring systems for velocity, length, distance, width, thickness, level and position of cold as well as hot material.
){kind=link}