Basic Info.
Network Site
Intermediate Node Routers
Transfer Rate
10/100/1000Mbps
Application
Industrial Application
Performance
Line-Rate Router
Architecture
Single Bus Symmetric Multi CPU
Transport Package
Neutral Packaging
Product Description
Product DescriptionComIn I500 is an industrial grade 5G WIFI6 dual-band wireless router, that integrates multiple functions such as new 5G cellular broadband Internet access, high speed WIFI transmission, serial port pass-thru transmission, and backend remote management. It is based on Qualcomm IPQ5018 chipset solution with 2x2 802.11ax that support data transfer rate up to 3000Mbps and enable to build a stable high-speed wireless network. In addition, ComIn I500 has high-performance wireless characteristics, which can obtain larger wireless coverage area and better wall penetration performance. ComIn I500 supports the wireless access of up to hundreds of wireless terminals that satisfy with the application scenario requirements of high-density wireless terminals. At the same time, ComIn I500 also has good compatibility and supports the access of most wireless terminals on the market. Users can use mobile phones, tablets or laptops to connect conveniently. It provides more processing performance, richer interfaces and higher network connection speed than ordinary industrial routers. This product is suitable for different application scenarios, such as vehicle WIFI, video transmission, PLC remote control, intelligent express cabinet, video surveillance, 5G coverage, etc.Product FeaturesWi-Fi6 (IEEE 802.11ax) Standard- 802.11ax, as the latest generation of IEEE 802.11 Wi-Fi standard, can increase user access capacity and bandwidth in high-density access scenarios, reduce service delays, and enhance user experience.
- Support 2.4GHz and 5GHz dual-frequency UL/DL MU-MIMO, enabling router to send data to multiple terminals at the same time, and the utilization rate of wireless spectrum resources is higher than predecessor 802.11ac.
- Support 1024QAM modulation, data transmission efficiency is increased by 40% compared with 802.11ac (256QAM).
- Support UL/DL OFDMA technology, use different subcarriers to transmit data to multiple terminals at the same time, reduce delay and improve network efficiency.
- Support spatial multiplexing technology, through the BSS coloring mechanism (BSS coloring) so that AP and terminal can distinguish overlapping BSS (basic service set), to minimize co-channel interference.
- Support target wake time* mechanism, allowing AP and terminal to negotiate sleep and wake time, reducing conflicts between terminals and unnecessary wake-up times, saving terminal power, and improving battery life.
Multi-User Uplink and Downlink-multiple Input and Multiple Output Technology (MU-MIMO)Support MU-MIMO technology, support up to 4 spatial streams, 2.4GHz frequency band supports 2 spatial streams, 5GHz frequency band supports 2 spatial streams, through DL/UL MU-MIMO technology, AP can send data to multiple terminals at the same time, The utilization rate of wireless spectrum resources has been doubled, increasing the number of access users and bandwidth, and improving user experience in high-density access scenarios.High-Speed AccessSupports 160MHz bandwidth. The increase in bandwidth has increased the available data sub-carriers and expanded the transmission channel; in addition, the use of 1024QAM modulation, MU-MIMO and other technologies makes the 5GHz single frequency band rate up to 2.4Gbps, and the whole machine rate is up to 3Gbps.5GHz PriorityThe AP supports both 2.4GHz and 5GHz dual-band access. By controlling the terminal to preferentially access the 5GHz frequency band, dual-frequency end users in the 2.4GHz frequency band are migrated to the 5GH frequency band, reducing the load and interference on the 2.4GHz frequency band, and improving user experience.Industrial Design- Based on Qualcomm IPQ5018 Chipset Solution
- Wide voltage input design: 12 ~ 18V
- Industrial grade software and hardware watchdog design, trouble free and reliable operation in power station, transportation, and industrial control environment application
- Industrial grade EMC electromagnetic compatibility and radiation performance, passed the GB/T17626.5-2008 Level 4 test standard
- Industrial grade components, working temperature: -40 ~ +55°C
- Industrial enclosure, suitable for extreme environments
- Fan-less heat dissipation technology effectively reduces the failure rate of the equipment
- SIM card protection design
- Meet the trouble-free and reliable operation under vibration and shock environment
Rugged, Stable and Reliable- Apply complete anti-disconnection mechanism that to ensure the end data terminal is always online
- The product passed EMC test requirements
- The Ethernet interface built-in 1.5KV electromagnetic isolation protection GB/T17626.5-2008 (Level 4)
- SIM/UIM interface built-in 1.5KV ESD protection GB/T17626.5-2008 (Level 4)
- Built-in reserve phase protection and overvoltage protection for the power interface
High Speed Cellular Network- Support 5G SA (Standalone) and NSA (Non-Standalone) network
- Backward compatible with 4G Cat18(UL)/Cat20(DL) or Cat12(UL)/Cat13(DL)*
- Support Band Lock, Base Station Lock
- Support SIM PIN Code Lock
- Support Network Mode Lock
Hardware Specifications | Model | I500 |
| Dimension | 150mm X 114mm X 40mm (Excluding Antenna) |
| Weight | 457g |
| Installation | Hanging-Ear or Din-Rail Installation |
| LED Indicators | PWR / WAN / LAN / 2.4GHz / 5.8GHz / Data / Cellular / Signal |
| Interfaces | 2 x 1GbE RJ45 Port (1 WAN and 1 LAN)
2 x SMA-MALE Antenna Connector (WIFI)
4 x SMA-FEMALE Antenna Connector (Cellular) |
| Power Input | 12V~36V/1.5A |
| Power | 12W |
| Environment |
| Operating Temperature | -30°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Operating Humidity | 5% - 95% (non-condensing) |
| Air Pressure | 86kPa ~ 106kPa Altitude |
| Safety Certification | can do according to the customer's request |
| Stability |
| Annual Failure Rate | AFR < 1.5% (Continuous Operation Status) |
| Chipset Solution |
| CPU | MTK MT7981BA+MT7976CN+MT7531AE |
| Flash | 32MB SPI Flash |
| RAM | 256MB DDR3L memory |
| Wi-Fi Characteristics |
| Wi-Fi Standards | 2.4GHz: 802.11b/g/n/ax
5GHz: 802.11a/n/ac/ax |
| Max Speed Rate | 2.4GHz: Max. 574Mbps
5GHz: Max. 2400Mbps |
| Antenna | 2 x 5dBi Dipole Antenna (Each Radio) |
| Working Frequency | 2.4GHz Radio: 2.412GHz ~ 2.472GHz |
| 5GHz Radio: 5.180 ~ 5.825GHz |
| Max. Transmit Power | 2.4GHz Radio: 20dBm@MCS0, 21dBm@MCS7
5GHz Radio: 20dBm@MCS0, 21dBm@MCS7 |
| Data Rate | 2.4G Radio:
802.11b: 1, 2, 5.5, and 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps
802.11n HT20/ HT40: MCS0~MCS15 (400/ 800ns GI)
802.11ax HE20/ HE40: MSC0 ~ MCS11(400/ 800ns GI) |
5G Radio:
802.11a: 6, 9, 12, 18, 24, 36, 48 and 54Mb/s
802.11n HT20/ HT40: MCS0~MCS15(400/ 800ns GI)
802.11ac VHT20/VHT40/VHT80: MCS0 ~ MCS9(400/ 800ns GI)
802.11ax HE20/ HE40/HE80: MSC0 ~ MCS11(400/ 800ns GI) |
| 2.4GHz Reception Sensitivity | 802.11g | 54M | -76dBm | 6M | -92dBm |
| 802.11n HT20 | MCS7 | -87dBm | MCS0 | -89dBm |
| 802.11n HT40 | MCS7 | -71dBm | MCS0 | -73dBm |
| 5GHz Reception Sensitivity | 802.11a | 54M | -76dBm | 6M | -92dBm |
| 802.11ac HT20 | MCS7 | -70dBm | MCS0 | -90dBm |
| 802.11ac HT40 | MCS7 | -68dBm | MCS0 | -87dBm |
| 802.11ac HT80 | MCS9 | -59dBm | MCS0 | -84dBm |
| Cellular Technology | 5G: 3GPP Release 15 NSA/SA operation, Sub-6 GHz
CN & EA Version: LTE DL Cat12, UL Cat13
GL Version: LTE DL Cat16, UL Cat18 |
| Frequencies | CN (China Mainland) | EA (European/LATAM) | GL (Global) |
NSA:
n41/n78/n79
SA:
n1/n28/n41/n77/n78/n79
LTE-FDD:
B1/B2/B3/B5/B7/B8/
B20/B28
LTE-TDD:
B34/B38/B39/
B40/B41
WCDMA:
B1/B2/B5/B8 | NSA:
n1/n3/n7/n38/n40/n41/
n77/n78/n79
SA:
n1/n3/n7/n8/n20/n28/n38/
n40/n41/n77/n78/n79
LTE-FDD:
B1/B2/B3/B4/B5/B7/B8/B20/B28A/B28B/B66
LTE-TDD:
B38/B40/B41
WCDMA:
B1/B2/B5/B8 | NSA:
n38/n41/n77/n78/n79
SA: n1/n2/n3/n5/n7/n8/n12/
n20/n25/n28/n38/n40/n41/
n48/n66/n71/n77/n78/n79
LTE-FDD:
B1/B2/B3/B4/B5/B7/B8/B12/
B13/B14/B17/B18/B19/B20/
B25/B26/B28/B29/B30/B32/
B66/B71
LTE-TDD: B34/B38/B39/B40/B41/B42/
B43/B48
LTE-LAA: B46
WCDMA: B1/B2/B3/B4/B5/B8/B19 |
| Data Rate | 5G NSA Sub 6:
Max 2.6Gbps DL / Max 650Mbps UL
5G SA Sub 6:
Max 2Gbps DL / Max 1Gbps UL
LTE:
Max 600Mbls DL / Max 150Mbps UL
WCDMA:
Max 42Mbps DL / Max 11Mbps UL | 5G NSA Sub 6:
Max 2.5Gbps DL / Max 650Mbps UL
5G SA Sub 6:
Max 2.1Gbps DL / Max 900Mbps UL
LTE:
Max 1Gbps DL / Max 200Mbps UL
WCDMA:
Max 42Mbps DL / Max 11Mbps UL |
| Antenna Type | External Antenna |
| Antenna Gain | 3dBi |
Address:
Floor 4, Building 5, Tongfukang Shuitian Industrial Zone, Shuitian Community, Shiyan Street, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components
Management System Certification:
ISO 9001
Company Introduction:
Movingcomm Technology specializes in R&D, production, sales, and service of wireless communication equipment, internet of things terminal products and solutions. The products of the company include wireless AP, Industrial routers, LTE, IoT smart terminals.
){kind=link}