Basic Info.
Transport Package
Stardand Package
Specification
Custom glass
Product Description
Product informationProduct name: FTO conductive glassSize: 50*50*2.2mm (customizable)Resistance: 7-10Ω (customizable)Transmission rate: 90%Temperature resistance: up to 500-600°CProduction process: cutting, etching, straight edge, round edge, point corner, scribing, grooving, hole opening, etc.Note: If you need to customize the shape, size, resistance, etching and scribing, please contact customer service! FTO conductive glass:FTO-fluorine-doped tin dioxide (Sno2:F), SnO2 is a wide band gap oxide semiconductor transparent to visible light with a band gap of 3.7-4.0ev and a regular tetrahedral rutile structure. After being doped with fluorine, Sno2 film has the advantages of good visible light transmittance, large ultraviolet absorption coefficient, low resistivity, stable chemical properties, and strong acid and alkali resistance at room temperature.FTO thickness: 1.1 mm,1.6mm,2.2mm,3.2mmFTO resistance: 7-20 ohmsShape: square, circle, triangle, trapezoid, special shape and other sizes and shapes can be customizedIt is widely used in liquid crystal display, photocatalysis, thin film solar cell substrate, dye-sensitized solar cell, electrochromic glass and other fields.Glass processing details: precision flat cutting, smooth edges.The products are processed, cut, polished, etc. by our company's professional technicians, and CNC equipment is used, with high cutting accuracy, and the error is within minus 0.05mmPunching, grooving, scribing: Numerical control cutting, engraving machine, laser machine, edging machine and other equipment are available to process various glass.Laser etching: Our company has advanced laser etching equipment, which can etch various shapes according to the needs of users. It is accurate and precise, and is trusted by customers.How to use conductive glass1. Stacking is not allowed at any time;2. In addition to regulations, it is generally required to be placed vertically; when operating in a horizontal position, try to keep the ITO face down; glass with a thickness of less than 0.55mm can only be placed vertically;3. Only four sides can be touched when picking and placing, not the surface of conductive glass ITO;4. Handle with care and do not collide with other fixtures and machines;5. If you want to store for a long time, you must pay attention to moisture, so as not to affect the resistance of the glassAnd transmittance;5. For large area and long strip glass, the float direction of the glass substrate should be considered when designing and typesetting.Conductive glass cleaningDuring the production, packaging and transportation of ITO/FTO conductive glass, the surface of the glass may be contaminated by impurities such as dust and grease. Cleaning the ITO/FTO conductive glass before using it is a necessary preparation. There are many cleaning methods. The most common one is ultrasonic cleaning with organic solvents. Grease stained on the glass surface is insoluble in water, but it is soluble in organic solvents such as toluene, acetone, and ethanol. Among them, toluene has a strong degreasing ability, so first clean with toluene, but toluene cannot remain on the glass surface. Because toluene is soluble in acetone, it can be cleaned with acetone, which not only cleans out the residual grease, but also dissolves toluene. Similarly, acetone cannot remain on the glass surface. Since acetone is soluble in ethanol, it can be cleaned with ethanol. Ethanol and water are mutually soluble in any ratio, and then use a large amount of deionized water to dissolve the ethanol, and then put it in anhydrous alcohol to store, and then take it out for use, so that you can wash multiple tablets at once. So generally:Toluene (10-20min) → acetone (10-15min) → ethanol (10-20min) → deionized water (20-30min) for ultrasonic cleaning → anhydrous alcohol storage (take it out for long-term storage).
Address:
Yanhuang Science and Technology Park E4-101, No. 333 Kaiyuan Avenue, Luoyang, Henan, China
Business Type:
Manufacturer/Factory
Business Range:
Instruments & Meters
Company Introduction:
It is an enterprise integrating R&D, production and sales of ultra-thin glass. Since its establishment in 2013, with its own exquisite craftsmanship, high-quality products, good procurement channels, honest and prudent service attitude and innovative research spirit, it has become one of the main suppliers in the domestic ultra-thin electronic glass processing and trade industry. In just a few years, it has become a leader in the glass processing trade industry. Focus on customized processing of ultra-thin glass sheets of various materials. B270, BF33, D263T, Corning 2320, K9, quartz, sapphire, Asahi Glass, domestic and other ultra-thin glass sheet processing, drilling and grooving technology, etc.
